Kenwood KTC-SR902 instruction manual 1, 2

— 6—
English
Operations from Model-A Control Unit
Select the category and channel you wish to listen to.
<KDC-MP222>
1Enter category and channel search mode
Press the [FM] button for at least 1 second.
2Select the category
Press the [FM] or [AM] button.
3Select the channel
Press the [4] or [¢] button.
Canceling category and channel search mode
Press the [FM] button for at least 1 second.
Entering and canceling the category and channel search mode
with remote
Press the [38] button on the remote.
<Others>
1Enter category and channel search mode
Press the [38] button.
2Select the category
Press the [FM] or [AM] button.
3Select the channel
Press the [4] or [¢] button.
Canceling category and channel search mode
Press the [38] button.
You cannot operate this unit until all the Category information is
acquired.
Category and Channel Search
Every receivable Channel is checked for 10 seconds.
1Start Channel Scan
Press the [AUTO] button for at least 2 seconds.
The channel scan will start.
2Release it when the channel you want to listen to is received
Press the [AUTO] button for at least 2 seconds.
Channel Scan
Calling up the channels in the memory.
1Select the preset band
Press the [FM] button.
2Call up the channel
Press the [1] — [6] button.
Preset Tuning
Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as
shown below.
Display Operation
"Channel" Normal manual seeking control.
"Preset" Search in order of the channels in the Preset
memory.
This function cannot be used in the category and channel search
mode.
Switching Seek Mode
KTC-SR902(K)English_r0 03.4.28 4:56 PM Page 6