English
Operations from Model-B or C Control Unit
You must have the Sirius ID number [ESN] for licensing with
Sirius Corp. Check the Sirius ID [ESN] of this unit as follows.
<B models>
1Select the Sirius Satellite Radio Mode
Press the [SRC] button.
Select the "SIRIUS" display.
2Check the Sirius ID [ESN] of this unit
Press the [DISP] button repeatedly until ESN mode is
displayed.
<C models>
1Select the Sirius Satellite Radio Mode
Press the [SRC] button.
Select the "SIRIUS" display.
2Change the switching display mode to "Display Type A" or
"Display Type B".
For display mode selection, see the <Switching Display
Mode> section of the instruction manual.
3Press the [S.A] button to enter the display control mode.
4Check the Sirius ID [ESN] of this unit
Press the [4] or [¢] button to select the "ESN" display.
5Press the [S.A] button.
Serial & Sirius ID [ESN]
It is especially important to retain the unit serial number and the
electronic Sirius Identification number for service activation and
potential future service changes.
Sirius ID [ESN] display
— 8—
When you have the model-B or C control unit categorized by
the <Which is your control unit?> (page 4), follow the operation
instructions given below.
Entering the channel and tuning.
1Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote.
2Enter the channel
Press the number buttons.
3Do Channel Search
Press the [4] or [¢] button.
Canceling Direct Access Tuning
Press the [DIRECT] button on the remote.
•If you make no button operation for 10 seconds, the Direct Access
Tuning mode is automatically canceled.
•You can set up to Channel number 223.
•You cannot search for a channel number which is not
broadcasting.
•If you cannot receive any signal in the input Channel due to a bad
condition on radio wave or another problem, "Acquiring Signal"
appears.

Direct Access Tuning (Function of remote)

Operations from Model-A Control Unit
KTC-SR902(K)English_r0 03.4.28 4:56 PM Page 8