— 9—
Press the [FM] button.
Each time the button is pressed the preset band switches
between the SR1/Si1,SR2/Si2 and SR3/Si3.
Selecting the Preset Band
Listening to the satellite radio.
Press the [SRC] button.
Select the "SIRIUS" display.
•You need to subscribe to SIRIUS to receive the service by Sirius
Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO
SUBSCRIBE"/ "CALL 888 539-SIRI" appears.
•It may take a little time to start receiving after you selected the
SIRIUS source.
•When you are using the control unit having the Sirius/Dab setting
in the menu system, select "SIRIUS"/"SIRI" in this menu.
Select Sirius Satellite Radio Mode
The Category that includes the channel received switches to the
next.
Press the [AM] button.
Category Select
Selecting the channel.
Press the [4] or [¢] button.
Tuning
Calling up the channels in the memory.
1Select the preset band
Press the [FM] button.
2Call up the channel
Press the [1] — [6] button.
Preset Tuning
Putting the channel in the memory.
1Select the preset band
Press the [FM] button.
2Select the channel to put in the memory
Press the [4] or [¢] button.
3Put the channel in the memory
Press the [1] — [6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the memory on each [1]
— [6] button.
Only the channel number is stored. Category information is not
stored.
Channel Preset Memory
•If there is no receivable Channel in Category, the Category
switches to the next.
•You cannot operate this unit until all the Category information is
acquired.
•Select category to switch to the first channel that contains that
category.
KTC-SR902(K)English_r0 03.4.28 4:56 PM Page 9