Basic Operations
A
Playing a USB device
When connecting a USB device, playback starts automatically.
⁄
• If the USB source is selected when a USB device is not connected, "No Device" is displayed.
• When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the contents in the USB device is changed.
• Make sure that the USB device is connected firmly.
Removing the USB device
Press 
on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to <USB Device Control> (page 36).
¤
• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.
12