Crossover Network Setup
You can set a crossover frequency of speakers.
1Select the speaker to set the crossover
1 |
|
| 1 |
|
|
|
|
2 |
| 2 | |
4
3
1Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the sub woofer. 4 Switches to the crossover setup screen.
2Display the Crossover setup screen
3 Set the crossover
5
6
7
5Sets the cross over frequency.
When front speaker or rear speaker is selected in step 1:
High Pass Filter adjustment When Subwoofer is selected in step 1:
Low Pass Filter adjustment
6Sets the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup and "LPF SUB FREQ" is set to other than
"Through")
7Returns to the "Audio Setup" screen.
DVD Setup
You can set up the DVD play.
1Display the DVD Setup screen
Touch 
in the "Setup Menu" screen (page 58).
2Setup each item
1
2
3
4
5
1Moves to the "DVD Setup 2" screen.
2 Selects a disc menu language.*1 (See <Language Setup>, page 60)
3 Selects a subtitle language.*1 (See <Language Setup>, page 60)
4 Selects an audio language.*1
(See <Language Setup>, page 60)
5 Sets the dynamic range.*1 (
"Wide")
The dynamic range is reduced by changing from "Wide" to "Normal" and from "Normal" to "Dialog". "Dialog" makes the total sound volume becomes larger as compared with "Wide" and "Normal", allowing you to listen to the movie's dialog more clearly.
This is effective only when you are using a Dolby Digital software.
The operation is available during the play stop mode.
Next page 3
English 59