Setup Menu
To register your original color
1Start the RGB coordinate
2Adjust each color value
2
3
4
1
5
1Selects a preset number to register.
2 Adjusts the Red value.
3 Adjusts the Green value.
4 Adjusts the Blue value.
5 Returns to the "Panel Color Coordinate" screen.
3Select a Preset number to register
Adjusted color is registered to the selected Preset button.
4Complete the color coordination
AV Interface Setup
You can set audio and visual (AV) interface parameters.
1Display the AV Interface screen
Touch 
in the "Setup Menu" screen (page 58).
2Setup each item
1
2
3
4
1Moves to the "AV Interface 2" screen.
2 Sets a name to be displayed when you
select a system that is connected via the AV INPUT port. (
"VIDEO")
When using the rear view camera, set it to
3 Sets an image display of the system that is connected via the AV INPUT port. (
"OFF") "OFF": When the image source is switched,
an image entered via the AV INPUT port is displayed.
"ON": When an image signal is entered via the AV INPUT port, this image is displayed.
4 Selects a navigation system connection. (
"RGB")
"RGB": Allows the Kenwood's Navigation System to connect via the AV INPUT port.
"Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.)
64