#: Press for # seconds.

To register your original color

1Start the RGB coordinate

2Adjust each color value

2

3

4

1

5

1Selects a preset number to register.

2 Adjusts the Red value.

3 Adjusts the Green value.

4 Adjusts the Blue value.

5 Returns to the "Panel Color Coordinate" screen.

3Select a Preset number to register

Adjusted color is registered to the selected Preset button.

4Complete the color coordination

AV Interface Setup

You can set audio and visual (AV) interface parameters.

1Display the AV Interface screen

Touch in the "Setup Menu" screen (page 61).

2Setup each item

1

2

3

4

1Moves to the "AV Interface 2" screen.

2 Sets a name to be displayed when you

select a system that is connected via the AV INPUT port. ( "VIDEO")

When using the rear view camera, set it to "R-CAM".

3 Sets an image display of the system that is connected via the AV INPUT port. ( "OFF") "OFF": When the image source is switched,

an image entered via the AV INPUT port is displayed.

"ON": When an image signal is entered via the AV INPUT port, this image is displayed.

4 Selects a navigation system connection. ( "RGB")

"RGB": Allows the Kenwood's Navigation System to connect via the AV INPUT port.

"AV-IN": Allows a third-party navigation system to connect via the AV INPUT port.

"Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.)

Next page 3

English 67