User Interface
You can set up user interface parameters.
1Display the User Interface screen
Touch in the "Setup Menu" screen (page 61).
2Setup each item
1
2
3
4
1Moves to the "User Interface 2" screen.
2 Selects the background to display. "Change": Displays images entered into this
unit. See <Background Select> (page 72).
3 Enables entering or deleting of background images into or from this unit.
Press to enter the USB suspend mode, and then remove the USB device. "Memory": Enables entering of background
images. See <Entering Background> (page 71).
"Delete": Enables deleting of background image entered into this unit. See <Background Delete> (page 71).
4 Sets whether to display the target when touching the panel.
5 |
| 6 |
7
8
9
5Returns to the "User Interface 1" screen.
6 Moves to the "User Interface 3" screen.
7Sets an
Playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds when updated.
"Manual": Information is displayed when you touch on the screen.
8Sets an
screen. ( "Off")
"Auto": Information is displayed for 5 seconds when updated.
"Off": Information is not displayed.
9Sets an
"Auto": Information is displayed for 5 seconds when updated.
"Manual": Information is displayed when you touch on the screen.
10 |
| 11 |
12
13
pReturns to the "User Interface 2" screen. q Moves to the "User Interface 4" screen. w Sets an
Playback screen. ( "Manual")
"Auto": Information is displayed for 5 seconds when updated.
"Manual": Information is displayed when you touch on the screen.
e Sets an
"Auto": Information is displayed for 5 seconds when updated.
"Manual": Information is displayed when you touch on the screen.
Next page 3
English 69