Audio Control
Tone Setup
You can set a Tone curve.
1Display the Tone screen
See <Equalizer Control> (page 89).
2Set the Tone
1
25
36
47
8
9
1Tone curve becomes flat.
2Bass adjustment items are displayed.
3 Middle adjustment items are displayed.
4 Treble adjustment items are displayed.
5 Sets the Center frequency.
6 Sets the level.
7 Sets the Q factor. (Only Bass and Middle can be set)
8 Bass DC Extend settings (Only when Bass is selected)
If turned "ON", it extends the bass center frequency to the low register by approximately 20%.
9 Returns to the "Equalizer" screen.
Zone Control
You can set the front and rear audio source.
1Display Zone Control
Touch 
in the "Audio Control Menu" screen (page 84).
1
1Displays the current source.
2Set the Zone Control
2
3
3
4
2Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off.
3Sets the front and rear audio source separately.
(This button appears when the Zone function is On.)
⁄
•When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.
4Adjusts the volume of the rear channel. (This button appears when the Zone function is On.)
86