You can set a crossover frequency of speakers.
(page 47 5)
X'Over setup screen
X ' O v e r
| HPF Front FREQ | |||
1 |
| 2 2 0 H z |
| |
| HPF Rear FREQ | |||
2 |
| 1 8 0 H z |
| |
3 | LPF SUB FREQ | |||
| 1 2 0 H z |
| ||
4 |
| |||
SUB Phase | N o r m a l | |||
5 Re t u r n
1 Sets a Front High Pass Filter frequency.
You can select any of the following frequency. Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz
2 Sets a Rear High Pass Filter frequency.
You can select any of the following frequency. Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz
3 Sets a Subwoofer Low Pass Filter frequency. You can select any of the following frequency. 50, 60, 80, 100, 120, Through Hz
4 Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set to "Reverse".
5 Returns to the Speaker setup screen.
•Set in both the front channel and rear channel simultaneously when using high pass filter function. You cannot set a correct crossover network if the high pass filter function is only used for one channel.
•The SUB Phase button is not displayed when the Sub- woofer Low Pass Filter is set to "Through".
48 English