Zone Control

You can set the front and rear audio source.

Displaying the Zone Control screen

Zone Control screen

1

1

4

5

3

7

 

2

8

 

6

6

1

1

Sound Effects Menu

1Adjusts the volume.

2Returns to the Control screen of the previous source.

3Calls the Setup Menu. (page 46)

4Calls the Sound Effects Menu.

5Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off.

When turned On, and are shown.

6Sets the front and rear audio source separately. (This button appears when the Zone function is On.)

•When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source.

However, if you have set the "Area" to "Reverse", the audio source that is output at the AV OUTPUT terminal is switched depending on the front sound source.

7Switches the front and rear audio sources.

(This button appears when the Zone function is On.)

Use "Reverse" to change over the front and rear audio sources.

8Adjusts the volume of the rear channel.

•There are following limitations when zone function is set to "On".

-There is no output from the subwoofer or center.

-Audio Setup function (page 47) and Equalizer setting function (page 66) are not available.

68 English