Kenwood KVT-737DVD, KVT-747DVD, KVT-767DVD Security Code Setup, 3Enter a security code, 5Reenter the security code, 4Register your security code, 6Register the security code again

Before Use

Security Code Setup

You can set a security code to protect your receiver system against theft.

•When the Security Code function is activated it cannot be released.

Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package.

1Display the Security Code Setup screen

Security

	If Security			is not shown,
	touch		or	to display it.
1							1
		4	S e c u r i t y C o d e		S e t	5
		3
		2	D S I	6 O n	O f f 6
			S e c u r i t y
1							1

1 Adjusts the volume.

2 Returns to the Control screen of the previous source.

3 Calls the Sound Effects Menu. (page 64)

4 Calls the Setup Menu.

5 Allows you to start security code registration.

6Turns the DSI function on or off.

If turned "On", the burglar alarm lamp flashes when the protection panel is removed. ( On)

• If you have already completed the code registration,

S e t is not available.

58 English

2Start the security code registration

S e t

P a s s Wo r d

1	1 s t
1	2	3
4	5	6
7	8	9
	0
2 C l e a r	3 C a n c e l	4 E n t e r

1Enters the numbers to your security code.

2 Clears your entry.

3 Cancels the registration and returns to the Security Code Setup screen.

4 Registers your security code.

3Enter a security code

0 — 9

Input a four-digit number.

4Register your security code

E n t e r

5Reenter the security code

Reenter the same security code as that you have entered in Step 3 for confirmation.

•If you enter a different security code, the screen returns to Step 3 (for the first code entry).

6Register the security code again

E n t e r

Now, your security code is registered.

If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code.

See below for details.