Crossover Network Setup
You can set a crossover frequency of speakers.
1Select the speaker to set the crossover
11
22
3 | 4 |
|
5
1Sets the High Pass Filter of the front speaker.
2Sets the High Pass Filter of the rear speaker.
3Sets the Low Pass Filter of the sub woofer.
4Switches to the crossover setup screen.
5Returns to the original screen.
2Display the Crossover setup screen
3Set the crossover
6
7
8
6Sets the cross over frequency.
7Sets the sub woofer phase. (Only when "Subwoofer" is set to "On" in Audio Setup and "LPF SUB FREQ" is set to other than "Through")
8Returns to the original screen.
DVD Setup
You can set up the DVD play.
1Display the DVD SETUP screen
Touch [DVD SETUP] in the SETUP Menu (page 70).
2Setup each item
1
2
3
4
5
1Selects a disc menu language.* (See <Language Setup>, page 72)
2Selects a subtitle language.*
(See <Language Setup>, page 72)
3Selects an audio language.*
(See <Language Setup>, page 72)
4Sets the dynamic range. (
Wide)*
The dynamic range is reduced by changing from "Wide" to "Normal" and from "Normal" to "Dialog". "Dialog" makes the total sound volume becomes larger as compared with "Wide" and "Normal", allowing you to listen to the movie's dialog more clearly.
This is effective only when you are using a Dolby Digital software.
5Returns to the original screen.
⁄
• * Disabled when a DVD is being played.
Next page 3
English 71