SETUP menu
System SETUP | 2 | 10:10 |
Key illumination color
6Green
Display illumination color
7Blue
8
6Select an illumination color of receiver buttons. (
Red)
"Green": Green
"Red": Red
7Select an illumination color of the Sub Display. (
Blue)
"Blue": A blue color display.
"Key Sync": The same color as the this unit buttn illumination color.
8Return to the original screen.
AV Interface Setup
You can set audio and visual (AV) interface parameters.
1Display the AV Interface screen
Touch [AV Interface] in the SETUP Menu (page 70).
2Setup each item
1
2
3
4
5
1Sets a name to be displayed when you
select a system that is connected via the AV INPUT1 port. (
VIDEO1)
⁄
•If you have set the navigation system connection to
2Sets an image display of the system that is connected via the AV INPUT2 port. (
Off )
"Off": When the image source is switched, an image entered via the AV INPUT2 port is displayed.
"On": When an image signal is entered via the AV INPUT2 port, this image is displayed.
3Sets a name to be displayed when you select an image of the system that is
connected via the AV INPUT2 port. (
VIDEO2)
4Selects a navigation system connection. (
RGB)
"RGB": Allows the Kenwood’s Navigation System to connect via its interface cable.
"Off": Must be used if no navigation system is connected. (The navigation display is cancelled when the AV source is switched.)
5Return to the original screen.
6
7
8
6Selects an AV source to be output at the AV OUTPUT port. (
7Sets a method to switch to the rear view camera video display. (
Off )
"On": Switches to the rear view camera video display when engaging the shift knob of car to "Reverse".
"Off": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse" and then pressing the [V.SEL] switch several times.
76