Using the CD/USB device

Preparation

Loading a disc1Press CD/USB [CD/USB] button to select CD mode.2Press [0] button to open the CD tray.3Place a disc into the tray with the label facing up.4Press [0] button to close the CD tray.

For a CD, the total playtime and total number of tracks will appear in the display.

For an audio fi le-CD, the total album number and total fi le number will appear on the display.

Removing a disc1Press [0] button, grasp the disc by its edges, and carefully pull it out.2Press [0] button to close the CD tray.Inserting a USB device1Press the[ ] button to select standby mode.2Insert a USB device to the USB connector on the front panel.3Press CD/USB [CD/USB] button to select USB mode.

Press the CD/USB [CD/USB] button in the CD mode.

The total album number and total fi le number will appear on the display.

Removing the USB device

1Press the[ ] button to select standby mode.

2Remove the USB device.

⁄

•To ensure good system performance; wait until the unit completely reads the disc/USB device before proceeding.

•If the disc compartment is not loaded with a disc, “NO DISC” is displayed. If the disc is unreadable, “CHECK DISC” is displayed.

•If the disc is unreadable or there is no playable audio file in the USB device, “NO DATA” is displayed.

•For audio files, reading time may exceed 10 seconds due to the large number of songs compiled into one disc/USB

device.

•The icon “MP3” appears only when an MP3-file is played. The icon “WMA” appears only when an WMA-file is played.

•When playing or recording from/to the USB device, removing it or turning the power off may corrupt the sound source and get it unplayable.

Playing a CD/ audio file

Press FWD PLAY 6 [6] button to start playback.

The track/fi le number and elapsed playing time of the current track/fi le appear on the display.

Basic opertions

Operation type

Operation

To stop playback

Press 7 [7 stop] button.

To interrupt

Press FWD PLAY 6 [6] button.

playback

Press again to resume playback.

To search for a Press and hold SEARCH/TUNING 4 or particular passage ¢ [4 or ¢ search +/–] button for

during playback more than 2 seconds.

Press the FWD PLAY 6 [6] button when the desired passage is located.

To select a track/ file Press SEARCH/TUNING 4 or ¢ [4 or ¢ search +/–] button in play or pause mode.

To select a album

Press P.CALL/ALBUM 5 or ∞ [p.call/

(For audio file only)

album up or down] button in play or

 

pause mode.

⁄

• For audio file; “DIR:xxx TRK:xxx” appears on the display. “DIR: xxx” indicates album number and “TRK:xxx” indicates the file number.

• The digit buttons, 0–9 on the remote control unit can also be used to select a track/file.

Press the digit buttons as shown below:

 

CD

Audio file

To select track/file 2

2 and ENTER

2 and ENTER

To select track/file 23

2 and 3

2,

3 and ENTER

To select file 120

—

1,

2 and 0

If the ENTER button is not pressed, the search for the selected track/file will start in 5 seconds.

English 13