Description of the button name in this manual

Most of the functions are designed to be able to operate from the remote control unit. Therefore, in this manual, the button names are described using the names on the remote control unit first, followed by names on the main unit put in parenthesis.

Example:

X-BASS[X-bass] button

Button on the main unit

Button on the remote control unit

Preparing the remote control unit

Pull the battery sheet out from the remote control unit to the direction of the arrow.

Operation

When the power cord is plugged in, standby indicator is lit. The power turns ON by pressing button on the remote control unit pointing at the remote sensor. When the power comes on, press the button you want to operate.

Remote sensor

Approx. 6 m

30° 30°

⁄

•The supplied battery may have shorter live than ordinary battery due to use during operation checks.

•When the remote-controllable distance gets shorter than before, replace the battery with a new one.

•Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction.

In such a case, change the location of the system installation to prevent malfunction.

Changing the battery of the remote control unit

Use a commercially available button battery (CR2025).

1Insert something narrow like a paperclip into the hole 1 and pull out the battery tray.

Keep on slide

Pull out

2Replace the old battery with a new one. CR2025(+side)¤CAUTION

•Lithium battery.

Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

•The battery pack or batteries shall not be exposed to excessive heat such sunshine, fire or the like.

•Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed contact physician immediately.

English 5