Kenwood MDX-F1 Recording on TAPE, 5Start recording, 1Load a tape in deck, 3Set the recording condition, 4Select the source to be recorded, TAPE, Example:, 2Insert a tape

Contents

30

Recording on TAPE1Load a tape in deck.

0

P	EN
U
	SH OP

Let's recording

MDX-F1 (EN)

This unit cannot record audio on High (Type ) and Metal (Type ) cassette tapes.

4 2 3

0

1 5

1Open the door of deck.

2Insert a tape.	÷ Remove tape slack before loading.
3Close the door.

2Select the tape transport direction. To reverse the transport direction

Operation

TAPE	1Press the play key.
2 3	2Press the play key again.
	3Stop key (7) playback.
	(2 or 3 lights.)

3Set the recording condition.	1Select “TAPE RVS.”.
Select the reverse mode.					De
∞					m
					o
	MENU				SET
	V			O	L
	O
	L			TR
	U	M		N
			O
			E/ MULTI C

÷When recording is started, the tape is transported in the direction selected in this step.

÷Wind the tape to the position where recording is to be started.

2	3	D
		e
		m
		o
		SET

V				O	L
O				R
L	U			T
		M	E/ MULTI	CO

4Select the source to be recorded.

Select an input source		C D
other than “TAPE”	TUNER (Broadcasts)
CD
		The character information display shows

	CD	the recording input source.
6	MD
Example:		÷ If a CD or MD has already been loaded, it starts to play now.
		Press the 7 key to stop it.
To select the CD input

5Start recording.

•

TAPE REC

1Press the TAPE REC key to start recording.2Play (or tune) the input source to be recorded.

÷The recording level is adjusted automatically.

÷Recording stops automatically when the tape side (s) to be recorded have been fully recorded.

÷The recording onto MD is not available during recording onto TAPE.