Contents

54

In case of difficulty

MDX-F1 (EN)

MD recorder section (Displayed messages and actions to be taken against them)

Knowledge section

Displayed MessageMeaningAction

 

NO DISC

÷ No disc is placed on the tray.

÷ Load a disc.

 

 

 

 

 

CAN'T COPY

÷ An attempt is made to record digital

÷ Recording is not possible.

 

 

signal from a source while its digital copy

 

 

 

has been prohibited by SCMS.

 

 

 

 

 

 

DISC FULL

÷ There is no recordable area on the disc.

÷ Use another recordable disc.

 

 

÷ An attempt is made to record a 256th

÷ More than 256 tracks cannot be recorded

 

 

track.

per disc.

 

 

 

 

 

TITLE FULL

÷ An attempt is made to assign a title with

÷ Refer to “Total number of title charac-

 

more characters than usable.

ters”.

 

 

 

 

BLANK DISC

÷ The disc does not contain any record-

÷ When playback is required, use a re-

 

 

ings.

corded disc.

 

 

 

 

 

NO TRACKS

÷ The disc does not contain any tracks but

÷ The disc can be used for recording with-

 

 

has a disc title.

out any problem.

 

 

 

 

 

READING

÷ The TOC *1 data of the disc is being

÷ This is a normal operation.

 

 

read.

 

 

 

 

 

 

WRITING

÷ The data related to editing or recording is

÷ This is a normal operation.

 

 

being written in the disc.

 

 

 

 

 

 

DISC ERROR

÷ The contents of UTOC *2 are abnormal.

÷ Perform “ALL ERASE” operation. If this

w

 

 

is not possible, use another disc.

 

 

 

 

CAN'T EDIT

÷ An attempt is made to perform editing

÷ Perform editing following the restric-

 

 

beyond the restrictions, for example to

tions.

 

 

erase a track which is too short.

 

 

 

 

 

 

?(blinking)

÷ This is a message for confirming if edit-

÷ Press the ENTER key to execute editing.

 

 

ing can really be executed.

 

 

 

 

 

 

PROTECTED

÷ The minidisc is write-protected.

÷ Cancel the write protection.

p

 

 

 

 

PLAY ONLY

÷ The minidisc is only for playback.

÷ Insert a minidisc for recording.

 

 

 

 

 

UNIT ERROR

÷ This indicates some trouble.

÷ Return to normal condition is made by

 

 

 

switching the unit off and then on again.

 

 

 

 

 

*1All minidiscs contain a Table of Contents (TOC) in addition to sound signals. The TOC is similar to the table of contents in a book and contains information, such as track numbers, track length, and character information, that cannot be rewritten.

*2In addition to the TOC, minidiscs also contain a special User’s Table of Contents (UTOC) that contains track number, track length, and character information, that can be rewritten.

Memory Backup for the MD Recorder Section

The contents of the memory are not stored on the disc if the power cord is unplugged.

If the power cord is unplugged suddenly or there is a power failure, the information on recording and editing (normally recorded when the minidisc is ejected) may be erased or destroyed before it is recorded on the minidisc. Once the information has disappeared, it can not be recovered.

After recording or editing, always remove the minidisc to record the recording or editing information.