Contents

MD Edit Functions 41

MDX-F1 (EN)

Combining two tracks (TRACK COMBINE)

Use the following procedure to combine two tracks into one by deleting a track number.After this operation, the track numbers of tracks located after the combined tracks are decreased automatically.

Image of track combining

A B C D E F

A BCE F

Select the “MD” input. (Perform the operations in the following procedure while the display is blinking.) *

1Select “COMBINE ?”.

To abort operation, press the TRACK EDIT key again.

 

“COMBINE ?” cannot be selected if the track being played is the first track of the disc.

1Press the TRACK EDIT key and select “COMBINE?”.

TRACK EDIT

When pressed in stop mode
Each press switches the

 

operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

MOVE ?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

COMBINE ?

 

 

 

 

 

 

 

 

 

 

- - - + - - -

 

? MD

 

 

 

 

 

3

ALL ERASE ?

 

 

EDIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

(Editing cancelled)

 

 

 

 

 

 

 

 

 

 

When pressed in play

 

mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Press the SET key.

 

 

1

DIVIDE ?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SET

 

2

COMBINE ?

 

 

 

 

 

 

 

 

 

 

0 0 2 + 0 0 3

 

? MD

 

 

 

 

 

3

ERASE ?

 

 

EDIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

(Editing cancelled)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you combine tracks during playback, go to step 3.

÷To combine two tracks during playback, press the TRACK EDIT key while the second track is being played.

2Select the track to be combined.
Select the movement destination track number and
press the SET key.

 

÷ The track which will be the first half of the track after

1 4P.CALL¢

2

combination should be longer than 2 seconds.

SET

 

 

÷ The combined track will be given the track number and

 

 

title of the track which has become the first half after

To decrease

To increase

combination. The track numbers of subsequent tracks

track No.

track No.

are corrected automatically.

Operation

3Enter the track combination.

ENTER

4After editing, eject and remove the mini disc.

With the MD, information is written in the disc when the ejection operation is performed after editing. After title input or editing, be sure to eject the minidisc so that the data is written in it by “WRITING”.

C O M P L E T E !

The “WRITING” display indicates that the recorded and edited data are written in the MD. Be careful not to apply impact to the unit during it.

If the power cord is unplugged before completion of “WRITING”,therecordedand/orediteddatamaybelost.