Connection of external components
The Line output can be used to connect an external component such as a speaker with
The USB connector can be used to connect an external component such as a stereo set with USB capability.
Connecting to the Line outoutSpeaker with
amplifierStereo amplifier/Car stereoCable with stereo mini- plugs
FM transmitter•When the Line output is used, the sound mode is set automatically to "NORMAL". (page 34)
•Prepare an optimum audio cable (commercially available) according to the input terminal of the connected external component.
•When using a FM transmitter, noise may be interfered depending the installation environment, including the vehicle model, devices in the surroundings and the antenna positioning.
|
| USB cable |
| |||
|
|
| ||||
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• For the operating procedure and the playable files, read the instruction manual for the connected stereo set.
•Do not use or leave this unit or connected component in an automobile compartment with high temperatures. Otherwise, equipment failure may result.
•The internal memory and the SD card are recognized as separate drives. If a drive cannot be selected from
•When the stereo component is switched off, the input selector is switched or the USB cable is disconnected, the USB connection is canceled and the database of this unit is updated. If you want to connect the stereo component with USB connection again, wait until the database updating finishes.
45 | English |