Notes on Disposal

Recycling the Built-in Battery

This unit uses a lithium ion rechargeable battery cell as the built-in battery. The lithium ion rechargeable battery is a recyclable resource. When disposing of the Transmitter, take out the built-in battery and bring it to your local recycling business.

WARNING

•Do not heat excessively the built-in battery, open it, modify it or throw it in fire or water.

Excessive heat generation, explosion or fire ignition may cause a fire.

•Do not leave the built-in battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.

•Attach insulating tape on the connectors of the built-in battery.A fire or explosion may result if the battery electrodes are short-circuited.

•Do not leave the built-in battery within the reach of children. Injury or other accidents may result.

•If the built-in battery fluid leaks and enters your eyes, immediately rinse your eyes with fresh water and call a doctor.

If the fluid is left in your eyes, an eye injury may result.







Removing the Rechargeable Battery (Built-in Battery) Before Disposal





 

 





 

 





 

 

IMPORTANT:

 



 

 

 

 



Never attempt to open this unit besides when disposing of it.

 

 

 

 

 

For replacement of the built-in battery, contact your nearest Kenwood service agent.

 

 

 

 

 

 

 

 

1 Open the SD card cover.5 Using a precision screwdriver (+),

 

 

 

 

2 Remove the 2 screws from the panelremove the 3 screws and remove the

 

 

 

 

using a precision Phillips screwdrivercircuit board.

 

 

 

 

(+).

6 Using the precision screwdriver (+),

 

 

 

 

3 Slide and remove the front case ofremove 2 screws and remove the built-

 

 

 

 

this unit.in battery mount.

 

 

 

 

4 Disconnect the built-in battery7Take out the built-in battery.

• Remove the built-in battery after having confirmed that it is completely discharged.

connector and 3 microphone8 Attach a piece of insulating tape on

• Once the built-in battery is disconnected, do not attempt to reconnect it to the connector on

connectors.the connector at the end of the cable

the circuit board.

 

 

 

 

from the built-in battery, and put it in a

• Bring the removed built-in battery to a rechargeable battery recycling business as early as

 

plastic bag, etc.

possible.

 

 

 

51

 

 

 

 

 

 

 

 

 

English