4-5. CLOCK AND TIMER

TIMER switch

This switch controls the time operation. When the TIMER switch is ON, the timer has priority over the POWER switch. If the radio will not turn on, check this switch!

® CLOCK1 /OFF/CLOCK2 switch

CLOCK 1 : Use this position, to display local time. Timer operation is controlled by local time.

OFF : In this position, nothing is displayed.

CLOCK 2 : In this position, a second time zone may be entered for display. Timer-ON/OFF operation is not controlled by clock 2 time. Set this clock to GMT or any other time zone that you wish to monitor.

® TIME SET switch

This switch is used to set the timer and the clock time.

® OFF TIME switch

Use this switch to display the time that the radio has been programmed to turn OFF.

® ON TIME switch

Use this switch to display the time that the radio has been programmed to turn ON.

® HOUR key

Sets the hours.

© MINUTE key

Sets the minutes. Pressing this switch simultaneously with the HOUR switch resets the clock or timer.

4-5-2. Clock

The R-5000 has two independent 24-hour clocks, CLOCK 1 and CLOCK 2. The clock times may be viewed with the POWER switch ON or OFF. Both methods are described below.

A. Clock selection

CLOCK 1 or CLOCK 2 is selected by the slide switch on the front panel.

a. When the POWER switch is ON.

25