3.INSTALLATION AND CONNECTION

3-1. INSTALLATION

3-1-1. Bail

The receiver can be elevated for operating convenicence.

Caution:

Do not use the bail to carry the receiver.

A.Power supply Cautions:

1.The POWER switch must be OFF before you con- nect or disconnect the power cable.

2.Do not apply AC and DC power sources at the same time.

(A) AC operation

When the R-5000 is to be operated from a fixed loca- using normal household current you should connect the AC power cable that is supplied with the ra-

dio to the AC terminal on the rear panel.

(B)DC operation (The optional DCK-2 DC Operation Kit is required for this operation.)

The R-5000 can also be operated from a 12 volt auto- mobile battery. Attach the power cable that is sup- plied with the DCK-2 DC Operation Kit to the cigarette lighter socket in your vehicle.

Cautions:

1.The DCK-2 DC Operation Kit, should be installed by qualified service personnel to prevent personal injury or damage to the equipment.

2.When charging the battery or when jump starting a dead battery you MUST disconnect the power cable from the back of the radio, or serious damage may re- sult to the radio.

3.The clock and the timer function even if the POWER switch is turned OFF. When the receiver is not in use, unplug the cigarette lighter plug from the vehicle's ci- garette lighter socket to prevent the battery from dis- charging.

9