Controls and indicators
| 9 MODE key |
| # Basic operation keys |
| |
Used for switching the function of the 4 / ¢ keys | CD 6 key | ™ | ||
to function menu mode. Press again to reset the func- | Used for selecting the CD input and starting playback. | |||
tion of the 4 / ¢ keys to normal mode. |
| |||
| During CD playback, press to pause. |
| ||
Items of function menu mode : |
|
| ||
| TUNER/BAND key | ∞ | ||
INPUT LEVEL | ¤ | |||
Used for selecting the TUNER input. |
| |||
BALANCE | ^ |
| ||
This key is also used to select the received broadcast | ||||
AUTO MEMORY | § | |||
band. |
| |||
DIMMER SET | w |
| ||
INPUT SELECTOR key | %¤ | |||
LEVEL METER | e | |||
Used for selecting an input source (PHONO, TAPE, | ||||
A.P.S. SET | e | AUX). |
| |
TIME ADJUST | $ | 7 (STOP)/TUNING MODE key |
| |
TIMER SET | ° | CD : | £ | |
SOUND PRESET | ¡ | Used for stopping a disc operation. |
| |
| TUNER : | ¶ | |||
ROOM EQ | & | |||
Used for switching between the AUTO (auto | ||||
• Some of the items may not be displayed depending on | ||||
tuning, stereo reception) and MONO (manual | ||||
selected input source. |
| tuning, monaural reception) modes. |
| |
ENGLISH
| 0 MUTE key | ^ |
Used for muting the sound temporarily. |
|
| ! VOLUME knob | ^ |
Used for volume adjustment. |
|
| @ 4 / ¢ (multi control) keys |
|
In the normal mode, these are used for |
|
– skip CD tracks | £ |
– select a preset radio station | § |
In the function menu mode (selected by pressing the MODE key), press these keys to select the desired menu item. To set or enter setting of the function menu item, press the ENTER key.
MODE | ENTER |
•The function of these keys returns to the normal mode when they have not been operated for 20 seconds.
| Standby mode: | $ |
Used for displaying the clock.
$DISPLAY key (for CD/TUNER inputs only) ¢Used for changing the
Used for displaying the day of week and the time.
| % SOUND CONTROL knob | ( |
Used for adjusting the SOUND level. |
|
| ^ TIMER key | q |
Used for activating or deactivate timer function.
| & PHONES jack | ^ |
Connect headphones with a stereo
| * REMOTE sensor | # |
This sensor receives signals from the remote control unit.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the unit to back up the memory. This is called Standby mode. Under the condition, the unit can be turned ON by the remote control unit.