Manuals / Brands / Home Audio / Stereo System / Kenwood / Home Audio / Stereo System

Kenwood R-K701 47 EN, Tuner section, CD player section, Displayed messages, Remote control unit, In case of difficulty

1 48

Download 48 pages, 1.18 Mb

In case of difficulty

Tuner section

Symptom		Remedy
Symptom		Remedy			ENGLISH
Radio stations cannot be received.	÷	Connect antennas.	78
	÷	Select a band.	∞
	÷	Select a band.	∞
	÷	Tune to the frequency of the desired station.	∞

Noise interferes.	÷	Install the outdoor antenna in an apart position from the road.
	÷ Switch the suspected electric appliance OFF.
	÷ Install the TV or the system at an increased distance between
		them.

A station has been preset but it cannot be re-	÷	Preset stations with tunable frequencies.	§
ceived by pressing the P.CALL key.	÷	Preset stations again.	§

CD player section

Symptom	Remedy
A CD is placed in the player but it cannot be	÷ Place the disc properly, with the label side facing upward.
played.	÷ Clean the disc referring to "Disc handling precautions".	t
	÷ Refer to "Caution on condensation" and remove the condensation
	by evaporation.	r

Sound is not produced.	÷ Press the CD 6 key.
	÷ Clean the disc referring to "Disc handling precautions". t
	÷ Discs which are recorded by data formats such as MP3 and
	WMA cannot be played back.

Sound skips.	÷ Clean the disc referring to "Disc handling precautions".	t
	÷ Install the unit in a place not subject to vibrations.

Remote control unit

Symptom		Remedy
Remote control operation is not possible.	÷	Replace with new batteries.	#
	÷	Operate the unit inside the remote controllable range.	#

Displayed messages

Displayed Message	Meaning
CAN’T SETUP	÷ The microphone for ROOM EQ is not connected or headphones are connected.	&

CD NO DISC	÷ A CD is not inserted in the unit.

CD TEXT FULL	÷ The disc has the text data of more than 1k byte.	¢

CHECK DISC	÷ TOC of the disc cannot be read. Or the disc (CD-R) which is not finalized is inserted.
	Check the disc.

PGM FULL	÷ An attempt is made to select a 33rd track during programing of CD.	‹

R.EQ ERROR1	÷ The measurement is impossible because measuring room is too noisy.	&

R.EQ ERROR2	÷ The measurement is impossible because no signal is input in the microphone. &

TRAY OPEN	÷ CD tray is opened.

47 EN

Contents

Page Before applying power The marking of products using lasers 2 EN Accessories Unpacking 3 EN Special features 4 EN Contents Preparation section Basic section Application section Knowledge section System connections Connection of the system accessories 6 EN FM indoor antenna 7 EN Connection of other accessories (Commercially available parts) FM outdoor antenna 8 EN Controls and indicators Display 9 EN Main unit 10 EN 11 EN Operation of remote control unit 12 EN 13 EN Clock adjustment 1Select "TIME ADJUST 2Adjust the day of week 3Adjust the hour 4Adjust the minute Basic use method (POWER) ON (OFF) 2. Selecting the desired input sources 15 EN 3.Adjusting volume 16 EN 17 EN 18 EN Using Digital Sound Equalizer function 19 EN Making your favorite sounds (MANUAL EQ ) 20 EN 21 EN Playback of CD 1. Load a disc 2.Start playback 22 EN 23 EN 24 EN Receiving broadcast station 1. Select the tuner input 2.Preset a radio station in memory 25 EN 3.Tuning (Preset Call) 26 EN 27 EN 28 EN RDS (Radio Data System) Switching the displays 29 EN Searching for a desired program type (PTY search) 1Select the PTY search mode 2Select the desired program type 30 EN 3Start the search To change to a different program type : 31 EN Listening to external input sources 1Select an external input source 2Play the connected equipment 3Adjust the volume Adjusting the external input level Various CD playback features Listening to the desired sequence (program playback) 1Select PGM mode 2Select track numbers in the order you want to play them 3Start playback To add a track to an existing program To clear a programmed track To get out of the PGM mode 34 EN Repeated playback Repeating a single track Repeating all tracks in a disc 35 EN Repeating selected tracks Playing tracks in a random order (random playback) 36 EN Timer operation Sleep timer (SLEEP) 37 EN Setting the timer program (PROG. TIMER) 1Make preparations for timer 2Set the timer setting program number 38 EN 3Select the program timer ON/OFF 4Select an execution day of the programmed timer 5Set the ON time, and then the OFF time 39 EN 6Set the desired Timer operation 40 EN 7Put the unit in standby mode Deactivating and activating the timer program 41 EN Setting DIMMER functions Select DIMMER mode 42 EN Switching the level meter 1Select "LEVEL METER 2Switch between ON and OFF 43 EN Important items Reference Maintenance 44 EN 45 EN In case of difficulty 46 EN 47 EN Specifications 48 EN