Basic use method
A very loud test sound is produced 
during the measurement. Please take into consideration that it may disturb your neighborhood, especially, when you
ROOM EQ function automatically performs the following adjustments with the provided microphone by measuring sound characteristics for the best listening environment according to your room conditions and speakers layout.
1.Sound delay from speakers2.Volume level differences between left and right speakers3.Speaker frequency characteristics and room sound characteristicsMeasuring room sound characteristics (ROOM EQ)
1Connect the microphone to the ROOM EQ MIC IN jack on the back of the unit. 72Place the microphone to the listening posi- tion (at a height of your ears).3Select "ROOM EQ" from the menu by press- ing the 4 / ¢ key, and press the ENTER key. Or press the ROOM EQ key on the re- mote control unit.
÷It takes about 1 minute until the measurement is completed.
÷If the microphone is not connected or headphones are connected, the measurement is impossible. ("CAN'T SETUP" is displayed.)
÷Make sure that the microphone is removed from the main unit right after the ROOM EQ measurement.
÷Effective result may not be obtained depending on the measurement surroundings.
÷Displays during and after the measurement
The ROOM EQ indicator (LED) blinks during the measurement. The ROOM EQ indicator (LED) and the RoomEQ indicator on the display light up.
1 2 3 4 5
RoomEQ
AUTO
L
30 10 5 3 1
R 
÷Image of the measurement
Place the microphone at a height of your ears.
Do not place any obstacles between the microphone and speakers during the measurement.
ENGLISH
MODE | ENTER |
or
÷ Image of effect by Room Equalizer function
4 Select "R.EQ START" by pressing the 4 /¢key and press the ENTER key.ENTER