Timer operation

7Put the unit in standby mode.

Press the (POWER) key.

÷When the unit enters the Standby mode, the STANDBY/TIMER indicator lights in green.

÷If there is a power failure or the AC power cord is unplugged after the timer reservation has been activated, the STANDBY/TIMER indicator blinks in green. In this case, the clock setting should be restarted from the beginning.

÷Active timer program can be seen on the display by pressing the 7(STOP) key.

ENGLISH

Deactivating and activating the timer program

Once the timer setting procedure has been performed, the timer program can be deactivated or activated easily.

When the unit is in on, press the TIMER key.

TIMER

or

Each press of the TIMER key changes the items ;

1 Activate PROG.1 timer.

2 Activate PROG.2 timer.

1, 2 Activate both PROG.1 and PROG.2 timer.

Deactivate the timer. (Timer indicator is off.)

÷The timer program contents remain even if the timer is deactivated.

÷After a power failure or the AC power cord has been unplugged, the STANDBY/TIMER indicator blinks in green. In this case, set the present time, and then go through the timer setting procedure again.

41 EN