System connection
11
Do not plug the power cord into a wall AC outlet until the connection has been completed.
Connect the equipment as shown in the figures.Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
÷Install the÷Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below.
Top panel : 50 cmSide panel : 10 cmBack panel : 10 cmSYSTEM
CONTROL
DIGITAL
OUTPUT
OPTICAL
RL
LINE OUTPUT
Audio cord (x2) (Supplied with
section Preparation
section Basic
Optical fiber cable (Supplied with
DIGITAL IN
OPTICALREC
IN
1
PLAY
OUT
2
R L
SYSTEM
CONTROL
section Application
1.In case an associated system component is connected, also read the instruction manual of the component. 2.Insert the
Notes 3.Be sure to attach the protection cap when the connector is not used. 4.Be careful not to bend, coil or bundle the optical fiber cable.
sections Knowledge