28Recording
Recording
Preparation section
section | 0 | |
Basic | ||
|
1
Top sideApplicationsection | Reverse |
Check the tape transport direction | |
| side |
| indicator. |
23
sections |
|
|
Knowledge | Dolby NR | rev. mode |
|
3 3
Recording
4
3 | 1 | 2 |
|
5
3
1. Load a tape in deck.
1Open the tray of the | ÷ Differentiation between normal (TYPE I) | |
cassette deck. | ||
and high (TYPE II) tape is set automati- | ||
2Insert a tape. | ||
cally. |
3Close the tray. ÷ Remove tape slack before loading.
Since longer tape than 100 minutes cassette tape is very thin, the
Note tape could adhere to the pinch roller or be easily cut. It is recommended that these tapes not be used with this unit to prevent
possible damage.
2.Select the tape transport direction.
To reverse the transport direction1Presstheplaybackkeyforthedirectiontobeplayed(lightsgreen).2Stop playback (lights red).÷When recording is started, the tape is transported in the direction selected in this step.
÷Wind the tape to the position where recording is to be started.
3.Set the recording condition.
1Select the reverse mode. | £ |
2Select the DOLBY NR mode. | £ |