Hearing sound
27
During recording, the indicator “A MEMO” flashes.
enter
Presetting is cancelled when no operation is executed for 5 seconds or more.2Select one of the preset numbers from 1 to 40.| Presetting is cancelled when | volume | pure A |
control |
| |
|
| |
| no operation is executed for 5 |
|
|
| seconds or more. |
|
|
| 3Press the “enter” key again. |
| enter |
÷Up to 30 stations can be memorized.
÷For use of the RDS function, stations must be memo- rized by RDS auto presetting.
÷RDS stations are given priority during auto presetting. If there is memory left after presetting, the receiver contin- ues presetting regular FM stations.
AUTO
A M E M O
÷For memorizing of stations other than RDS stations (FM, AM), memorize the stations according to chapter “One-
“MEMO.” lights (for approx. 5 sec.)
AUTO ST. TUNED
)- 8 9 .) ) MHz MEMO.
Goes off
AUTO ST. TUNED
)3 8 9 .) ) MHz
÷Repeat steps 123 to preset other stations.
÷If several stations are preset under the same number, the previous memory is replaced with the latest memory contents.
section Preparation
section Basic
AUTO
F M 8 8 .) ) MHz
÷When a key is held depressed, preset stations will be skipped at an interval of about 0.5 second.
÷Preset calls also can be made by numerical input via the numeric keys on the remote control. When the key for the tens digit has been pressed erroneously at the time of input, press the +10 key several times to return to the original display and then enter the number again.
Lights during stereo reception Frequency display
AUTO ST. TUNED
F M 
8 9 .) ) MHz
The “TUNED” indicator lights when a station is received.
2Tune in a station.| Auto tuning | : Each press receives the next |
| station. |
| Manual tuning | : Press and hold until the de- |
| sired station is received. |
|
|
|
|
DISPLAY | 1Reception band/Frequency |
|
section Application
sections Knowledge