Specifications
Receiver20 watts per channel minimum RMS, both channels driven, at 6 Ω, 1 kHz with no more than 10 % total harmonic distortion.
(DIN) 1 kHz at 6 Ω, 0.7 % T.H.D............ | 15 W + 15 W |
7.5watts per channel minimum RMS, both chan- nels driven, at 6 Ω, 1 kHz with no more than 10 % total harmonic distortion.
Total harmonic distortion | ...... | 0.02% (1 kHz, 10 W, 6 Ω) |
Frequency response ......... | 20 Hz ~ 40 kHz, +0 dB, | |
Input..........................................................sensitivity / Impedance | 200 mV / 47 kΩ | |
|
| |
Output level / Impedance |
| ................... 2.0 V / 1 kΩ |
SUPER WOOFER PRE OUT | ||
TAPE REC ........................................... | 200 mV / 1 kΩ | |
Signal to noise ratio |
|
|
............................................................. | 96 dB (IHF’66) |
Tuning frequency range ............... | 87.5 MHz ~ 108 MHz |
Usable sensitivity (DIN) |
|
Signal to noise ratio
(DIN weighted at 1 kHz, 65.2 dBf input)MONO .............................................................. | 65 dB |
STEREO ............................................................ | 58 dB |
Selectivity (DIN ±300 kHz) ................................... | 64 dB |
Stereo separation (DIN at 1 kHz) ........................ | 35 dB |
Tuning frequency range ................ | 531 kHz ~ 1,602 kHz |
Usable sensitivity (30% mod., S/N 20 dB) | |
.................................................... | 15 µV / (500 µV/m) |
Signal to noise ratio (at 30% mod., 1 mV input) | |
........................................................................... | 48 dB |
Output level / Impedance (30% mod., 1 mV input) | |
............................................................... | 0.18 V / 1 kΩ |
General |
|
Power consumption.............................................. | 45 W |
Dimensions .................................................. | W: 200 mm |
| H: 77 mm |
| D: 278 mm |
Weight (net) .......................................................... | 3.0 kg |
|
|
|
| 55 |
|
|
|
|
|
| |
|
|
| |||
CD player |
|
|
|
|
|
Laser ............................................. | Semiconductor laser |
| |||
Playing rotation .................... | 200 rpm ~ 500 rpm (CLV) |
| |||
Frequency response ................. | 4 Hz ~ 20 kHz, ±1.0 dB |
| |||
Signal to noise ratio......................... | More than 100 dB |
| |||
Dynamic range .................................... | More than 96 dB |
| |||
Total harmonic distortion |
|
|
|
|
|
.................................... | Less than 0.004 % (at 1 kHz) |
| |||
Channel separation .......... | More than 92 dB (at 1 kHz) |
| |||
Wow & Flutter ............................. | Unmeasurable Limit |
| |||
Output level......................................................../ Impedance | 1.2 V / 1 kΩ |
| |||
Fixed |
|
| |||
Digital output |
|
|
|
|
|
Optical ...................................... |
| ||||
|
| (wave length 660 nm) | Preparation | ||
General |
|
|
|
| |
|
|
|
|
| |
Power consumption.............................................. |
| 10 W |
| ||
Dimensions .................................................. | W: 200 mm |
| |||
Weight (net) .......................................................... | H: | 77 mm | section | ||
|
| 2.0 kg | |||
|
| D: 249 mm |
| ||
Cassette deck |
|
|
|
| |
Track ...................................... |
| ||||
Recording system ................................ | AC bias system |
| |||
|
| (Frequency: 105 kHz) |
| ||
Heads |
|
|
|
| Basic |
Playback / recording head ...................................... | 1 | ||||
|
| ||||
Erasing head ............................................................ |
| 1 | section | ||
Motors ........................................................................... |
| 1 | |||
|
|
| |||
Wow and flutter ................................. | 0.1 % (W.R.M.S.) |
| |||
Fast winding time ...................... | Approx. 110 seconds |
| |||
|
|
| |||
Frequency response |
|
|
|
|
|
TYPE I tape .................... | 40 Hz to 18,000 Hz, ±3 dB |
| |||
TYPE IV tape ................. | 40 Hz to 19,000 Hz, ±3 dB |
| |||
Signal to noise ratio |
|
|
|
|
|
Dolby B NR ON ............................ | 67 dB (CrO2 tape) | Application | |||
Dolby C NR ON ............................ | 73 dB (CrO2 tape) | ||||
|
| ||||
Dolby NR OFF .............................. | 60 dB (CrO2 tape) |
| |||
Input sensitivity / Impedance ............ | 77.5 mV / 47 kΩ |
| |||
Output level / Impedance | ................... | 775 mV / 10 kΩ | section | ||
General |
|
|
|
| |
|
|
|
|
| |
Power consumption.............................................. |
| 14 W |
| ||
Dimensions .................................................. | W: 200 mm |
| |||
|
| H: | 77 mm |
| |
|
| D: 249 mm |
| ||
Weight (net) .......................................................... |
| 2.2 kg |
| ||
|
|
|
|
| section Knowledge |
| 1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may |
Notes | be changed without notice. |
| 2.Sufficient performance may not be possible at very low temperatures (under a |