Manuals / Brands / Car Audio and Video / Car Stereo System / Kenwood / Car Audio and Video / Car Stereo System

Kenwood DP-SG7, r-sg7 Giving preference to the tape length over the track sequence, (time edit recording), 3Start edit recording, 1Select the “EDIT” mode, P.MODE, “EDIT”, “EDIT”

1 56

Download 56 pages, 1.52 Mb

36

Convenient CD recording

R-SG7/DP-SG7/X-SG7 (EN)

Giving preference to the tape length over the track sequence(time edit recording)

When the tape recording time is specified, recording is executed with changing the track sequence so that no track will be interrupted when the tape direction is changed at the end of one side.

Recording preparations are required.•(Steps 1 to 4)

Preparation section

1Select the “EDIT” mode.

1Confirm that the “PGM” indicator is not lit.

If the “PGM” indicator is lit, press the P.MODE key to turn it off.

2Press the EDIT key.

EDIT

The editing is ended when no operation is executed for 8 sec or more.

Confirm that this is not lit

PGM TRACK NO.

0 0

÷To cancel the EDIT mode, press the P.MODE key of the remote control unit.

DP-SG7

PGM	TRACK NO.	EDIT	1	2	3	4	5
		C - - -	6	7	8	9	10
		C - - -	11

section

2Enter the recording length of the tape.

Basic

Application section

1 2 3

4 5 6

7 8 9

PTY SEARCH

0 +10

When the “time” key is pressed repeatedly, a tape length of 46, 54, 60, or 90 minutes can be selected easily. After selection, press the EDIT key to go to step 3.

Confirm that the “EDIT” indicator changes from flashing to steady lighting, and then go to step 3.

Press the numeric keys as shown below. 30-minute tape : 000)46-minute tape : 00006

DP-SG7

PGM

EDIT A

3

0 3 F I L E

÷When automatic edition has been completed, the “EDIT” indicator lights.

÷When a wrong time has been entered, confirm that the “EDIT” indicator is lit and start again from step 1.

÷Up to 32 tracks can be edited.

÷Every time the ¢ key is pressed, the edited track numbers will be displayed in the changed order. Press the 7key to return to the track number of the first track.

Knowledge sections

3Start edit recording.

O.T.E.

DP-SG7

		TRACK NO.	EDIT A	1	2	3	4	5
	PGM	TRACK NO.	EDIT A	1	2	3	4	5
		0 1	0 : 0 5	6	7	8	9	10
		0 1	0 : 0 5	11

÷The tape and CD stop automatically when recording has completed.

Note

Depending on the combination of conditions from CD contents (number of tracks and length of the tracks) and tape recording time, interruption of a track may not be avoidable. In such a case, the respective track will not be recorded.

Contents

Page 2Before applying power For the United Kingdom Safety precautions The marking of products using lasers (Except for some areas) Contents Basic section Application section R.D.S. (Radio Data System) Listening with high sound quality (Pure A) IMPORTANT SAFEGUARDS Servicing Outdoor antenna grounding Power lines AC outlets Overloading The High grade Micro Component Series Thank you for purchasing the High grade Micro component series Remote Control Automatic Operation Synchronized Recording Special features ¶“Pure A” High Quality Mode at Low Volume ¶Newly developed D.R.I.V.E. IC installed ¶Easy Operation ¶CD TEXT compatibility 8 System Composition and Installation System connection 1. Antenna connection 2. Connection of audio cord Caution for Connection Connect the equipment as shown in the figures CAUTION ÷Install the R-SG7on the top of the system ÷Do not place any objects impairing heat radia- tion onto the top of unit Top panel : 50 cm Side panel : 10 cm 3. Connection of speakers 4. Connection of system control cord 5. Power Cord Connection 14 Controls and indicators Main Unit Controls and indicators Receiver R-SG7 (on/standby) key 2“phones” jack 3“volume control” knob 7“enter” key(¶r Remote control Unit [RC-R0713E] Operation of remote control unit 18 Hearing sound Basic use 1. Switching the power ON (OFF) 2.Selecting the desired output Muting the sound temporarily (Remote control unit only) Bass and treble compensation (N.B.: Natural Bass circuit) Playback of CD 1. Load a disc 2. Start playback Skipping tracks To skip backward Playback from desired track Select the desired track No Press the numeric keys as shown below Playback of tape 1.Load a cassette tape 2.Start playback To stop playback DPSS Skip search Listening with fast forward for unrecorded portions (dash & play) One-programrepeat playback Plays a single music program repeatedly up to 16 times Press during playback Rewind playback Rewinds tape to the beginning and restarts playback from there Receiving broadcast station 1. Select the broadcast band tion in preset memory in advance.) Collective presetting of stations (auto preset) 1Receive a FM broadcast One-by-onepresetting (manual preset) 1Press the “enter” key during reception Presetting is cancelled when no operation is executed for 5 seconds or more 2Select one of the preset numbers from 1 to Presetting is cancelled when 28Recording Recording 1. Load a tape in deck 2.Select the tape transport direction 3.Set the recording condition 4.Select the source to be recorded 5.Start recording To repeat a recording Return to the recording start position Press the rewind key during recording Automatic Adjustment of the Recording Level (CRLS) 1Play the contents to be recorded Playback of CD Listening in the desired sequence (program playback) To add a track to the program 2Press the P. MODE key To delete a programmed track To quit the program mode Auto space function Repeated playback To select another track in the middle of playing one Convenient CD recording Selecting the optimum recording method If you want to avoid any tune being interrupted at the end of tape If you want to select the tracks to be recorded while playing a CD Giving preference to the tape length over the Giving preference to the tape length over the track sequence (time edit recording) Recording preparations are required.•(Steps 1 to 4) 1Select the “EDIT” mode If the “PGM” indicator is lit, press the P.MODE key to turn it off To end recording in the middle One-touchrecording of an entire CD (ONE TOUCH EDIT.....recording of all tracks) R.D.S. (Radio Data System) Searching for a desired program type (PTY search) 3Start the search To select another program type EXAMPLE: Searching for a Rock Music broadcast PTY “PTY” Tobeabletolistentothedesiredinformationatanytime(EON reservation) 1Select the desired information 2Receive an RDS station Select a station where “RDS” and “EON” are lit 3Wait for the desired information Listening in Pure A Mode 44Clock adjustment Timer operation Timer programming 5Enter the ON time hour minute 6Enter the OFF time 7Make the desired reservation 8Set the program Ensure that the power is OFF Check the reservation content When timer operation is not required Extinguish theprogram indication Important Items Disc handling precautions Notes on cassette tape Never play a cracked or warped disc Disc accessories Maintenance Reference 52In case of difficulty In case of difficulty Cassette deck unit Sound cannot be produced by pressing the play key or no operation occurs even when an operation key is pressed CD player unit A CD is placed in the player but it cannot be played Disc handling precautions” Specifications For your records