Kenwood RC400 manual safety, before using your Kenwood appliance, before plugging in

Models: RC400

1 6
Download 6 pages 29.9 Kb
Page 2
Image 2
before using your Kenwood appliance

before using your Kenwood appliance

Read these instructions carefully and retain for future reference.

Remove all packaging and any labels.

safety

Never put the body of the appliance in water or let the cord or plug get wet – you could get an electric shock. And never put liquid in the body of the appliance.

Never use a damaged appliance. Get it checked or repaired: see ‘service’.

Keep children away from the appliance. And never let the cord hang down where a child could grab it.

Don’t get burnt by hot parts, boiling water or steam from the appliance. Use oven gloves when removing the inner bowl and lid.

Do not keep rice warm for longer than one hour and do not reheat cooked rice in the rice cooker.

Don’t let the cord touch hot parts.

Unplug when not in use and never leave the appliance on unattended.

Don’t place on or near a hot gas or electric burner or in a heated oven.

Don’t leave the appliance on a heat sensitive surface.

Only use the rice cooker with the inner bowl supplied.

Don’t use the appliance outdoors.

Do not let infirm people use the appliance without supervision.

Do not let children use or play with the appliance.

Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.

before plugging in

Make sure your electricity supply is the same as the one shown on the underside of your rice cooker.

This rice cooker complies with European Economic Community Directive 89/336/EEC.

Important – UK only

The wires in the cord are coloured as follows:

Green and Yellow = Earth, Blue = Neutral,

Brown = Live.

The appliance must be protected by a 13A approved (BS1362) fuse.

WARNING: THIS APPLIANCE MUST BE EARTHED.

Note:

For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

before using for the first time

Wash the parts see ‘cleaning’.

2

Page 2
Image 2
Kenwood RC400 manual safety, before using your Kenwood appliance, before plugging in, Important - UK only