key

vent lid

steamer basket inner bowl spatula handles

body storage clip feet control lever indicator lights detachable cord measuring cup

using your rice cooker

1Use the measuring cup provided to measure the desired quantity of rice. As a guide one cup of rice is sufficient for one person, but this will vary according to individual tastes. Fill the cup with rice levelling the top

.

2Thoroughly wash the rice in several changes of clean water and drain. Failure to do so may cause poor results and/or a build up of steam within the appliance. Do not wash the rice in the inner bowl as you may damage it.

3Transfer the rice to the inner bowl and level the surface of the rice. Add sufficient cold water to the corresponding level marked on the bowl e.g. to cook 3 cups of rice, place the washed rice into the inner bowl and then fill with water up to the 3 cup level.

models

min

max

 

capacity

capacity

 

 

 

RC405/407

3 cups

7 cups

 

 

 

RC410/417

3 cups

10 cups

 

 

 

You may find that for your own personal taste you need to slightly adjust the amount of water added. For a softer rice add a little more water, and for a firmer rice a little less water.

4Transfer the inner bowl to the rice cooker ensuring that there is no rice or any moisture on the outside of the bowl.

5Cover with the lid, ensuring that the vent hole in the lid is situated away from the operator.

6Fit the detachable cord to the rice cooker and then connect the appliance to the power supply. Depress the control lever to the COOK position and the cook light will glow.

7Once the rice is cooked, the appliance will automatically switch to the WARM position and the keep warm light will glow. Leave the appliance on this setting for at least 15 minutes without lifting the lid.

8Carefully lift the lid and allow any condensation to drip into the rice cooker. Use the spatula provided to fluff up the rice which is then ready to eat. Replace the lid as quickly as possible. Consume the stirred rice within 1 hour.

9Should the inner bowl be lifted whilst the cooker is in operation, the appliance will automatically switch to WARM. To re-commence cooking, replace the bowl and reset the control button to COOK.

10After use, switch off and remove the plug from the power supply.

3

Page 3
Image 3
Kenwood RC400 manual Key, Using your rice cooker, Models Min Max Capacity, Cups