●This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.
before using for the first time
1Remove all the packaging .
2Wash the parts: see ‘cleaning’.
key
stirrer
cap
lid
handle
goblet
sealing ring
blade assembly
power unit
tap assembly
to use your smoothie blender
1Fit the sealing ring over the blade assembly.
2Screw the goblet onto the blade unit.
3Screw the tap assembly onto the
goblet. Check that the dispensing tap lever is in the off position .
4Place the assembled goblet on the power unit.
5Place the liquid ingredients into the goblet.
●This includes fruit (not frozen), fresh yoghurt, milk and fruit juices. These can be placed into the goblet to the
level marked LIQUIDS for either 2 or 4 servings.
6Add ice or frozen ingredients to the goblet.
●This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can be added up to the level marked FROZEN INGREDIENTS for the corresponding number of servings.
7Screw the lid onto the goblet.
8Either put the cap into the lid, then turn. Or place the stirrer in the hole.
●The stirrer can be used when blending thick mixtures or when large quantities of frozen items are used.
9Press the MIX button for up to 30 seconds, this is to start the mixing process, then press the SMOOTH button. Allow the ingredients to blend until smooth.
●Use the stirrer by moving it in an anti
clockwise direction.
10 Place a glass underneath the tap, press the MIX button and press down on the dispensing tap lever.
●Thinner drinks may dispense without having to switch on the power unit.
●Use the stirrer to assist when dispensing thick smoothie drinks.
●To help dispense the last amount of a thick smoothie drink, add a few tablespoons of liquid to increase the flow.
●When the glass is full, switch off and release the lever.
OR
Switch off, remove the goblet and pour the drink.
hints
●To make a thinner smoothie drink add more liquid.
●To make a thicker smoothie drink add more frozen ingredients but do not exceed the frozen limit marked on the goblet.
●Before fitting the lid, push the solid ingredients into the liquid using the stirrer.
●Use the PULSE button to operate the power unit in a start stop action to control the texture of your drink. Take care as this automatically selects the higher speed and may cause the drink to be thrown up the sides and onto the lid of the goblet.
●After blending, some drinks may not be completely smooth due to seeds or the fibrous nature of ingredients.
●Some drinks may separate on standing, therefore it’s best to drink them straight away. Separated drinks should be stirred before drinking.
3
