BASIC OPERATIONS
1Turn the Power switch/ Volume control clockwise to switch the transceiver power ON.
• A beep sounds if enabled by
1
your dealer.
2Press the key programmed with the Monitor or Squelch Off
| function to hear background |
1 | noise, then rotate the Power |
| switch/ Volume control to adjust |
| the volume. |
3Rotate the Channel selector to select your desired channel.
• When you receive an appropriate signal, you will
1
hear audio from the speaker.
4To make a call, press and hold the PTT switch, then speak into the microphone using your normal speaking voice.
• Hold the microphone approximately 1.5 inches (3 to 4 cm) from your lips.
5Release the PTT switch to receive.
Note: When the battery pack voltage becomes too low, transmission will stop and an alert tone will sound. See “Low Battery Warning” on page 19.
10
