![](/images/new-backgrounds/1228722/22872253x1.webp)
FLEETSYNC OPERATION
FleetSync is a protocol owned by KENWOOD Corporation and is enabled or disabled by your dealer. This function opens the squelch only when the transceiver receives the Fleet code and ID code programmed in your transceiver. Calls that do not contain the correct codes will not be heard.
■Receiving
When you receive a signal containing both your Fleet code and your ID code, squelch opens and you will hear the call.
•An alert tone will sound.
•The LED indicator flashes orange.
•To mute the speaker after squelch opens, press the key programmed as Monitor or Monitor Momentary.
■Transmitting
To transmit a FleetSync signal, simply press the PTT switch and make the call. If the selected channel has been programmed with a FleetSync PTT ID, it will be transmitted when the call is made.
BEGINNING/ END OF TRANSMISSION SIGNAL
The Beginning of Transmission and End of Transmission identification signals are used to access and release some repeaters and telephone systems.
If Beginning of Transmission is set, the ID signal is transmitted when you press the PTT switch.
If End of Transmission is set, the ID signal is transmitted when you release the PTT switch.
If both are set, the ID signal is transmitted when you press and release the PTT switch.
21