Digital Video Recorder User Manual
‘NC’ means normal close. If ‘NC’ is chosen, the DVR will alarm when the alarm is in high level.
5.TRIGGER RECORD
One channel can connect to one sensor. But one sensor can match one or more channels.
STEP1 Press "Up", "Down", "Left" and "Right" buttons to move the cursor to "TRIGGER RECORD" option. STEP2 Select the check box of the channel which sensors match.
STEP3 Press "Enter" key to confirm the operation.
For example, if you select the sensor named SENSOR1 and the trigger records named CAM1 and CAM2, it will record on channel 1 and channel 2 when the SENSOR1 is triggered.
6.ALARM OUT
There are two options to choose: ALARMOUT1 and BUZZER.
•When ALARMOUT1 is selected and the sensor is triggered, DVR will give normal alarm.
•When BUZZER is selected and the sensor is triggered, DVR will give buzzer alarm.
•When the alarm output is unselected, DVR will not send alarm.
7.SCHEDULE
It is the schedule of the sensor detection. The default schedule is everyday.
8.COPY TO
You could copy the setting of this channel to any other selected channel.
OTHER ALARM
Other Alarm submenu is shown as Fig3.13 Other Alarm Configuration. Other alarm includes video loss, disk full and so on.
Fig3.13 Other Alarm Configuration
There are two options of alarm output: ALARMOUT1 and BUZZER.
21
