3Com 10014298 - page 275

RMON 275
■Adding and Deleting an Entry to or from the Alarm Table
■Adding and Deleting an Entry to or from the Event Table
■Adding and Deleting an Entry to or from the History Control Table
■Adding and Deleting an Entry to or from the Extended RMON Alarm Table
■Adding and Deleting an Entry to or from the Statistics Table
■Displaying the RMON Configuration
Adding and Deleting an Entry to or from the Alarm Table
RMON alarm management can monitor the specified alarm variables, such as,
statistics on a port. When a value of the monitored data exceeds the defined
threshold, an alarm event will be generated. Generally, the event will be recorded
in the device log table and a Trap message will be sent to NMS. The events are
defined in event management. The alarm management includes browsing, adding
and deleting alarm entries.
Use the following commands to add or delete an entry to or from the alarm table.
Perform the following configuration in system view.
Adding and Deleting an Entry to or from the Event Table
RMON event management defines the event ID and handling of the event by
keeping logs, sending trap messages to NMS, or performing both at the same
time.
Use the following commands to add or delete an entry to or from the event table.
Perform the following configuration in system view.
Tabl e 313 Adding or Delete an Entry to or from the Alarm Table
Operation Command
Add an entry to the alarm table. rmon alarm entry-number
alarm-variable sampling-time {
delta | absolute } rising-threshold
threshold-value1 event-entry1
falling-threshold
threshold-value2 event-entry2 [
owner text ]
Delete an entry from the alarm table. undo rmon alarm entry-number
Tabl e 314 Add or Delete an Entry to or from the Event Table
Operation Command
Add an entry to the event table rmon event event-entry [
description string ] { log | trap
trap-community | log-trap
log-trapcommunity | none } [
owner rmon-station ]
Delete an entry from the event table undo rmon event event-entry