3Com 10014298 manual Create VLANs, Enable Gvrp globally, Enable Gvrp on the trunk port

66CHAPTER 3: VLAN CONFIGURATION

Figure 18 GVRP Configuration Example

E1/0/1 E2/0/1

Switch B

Switch A

Configure Switch A:

1Set Ethernet1/0/1 as a trunk port and allow all the VLANs to pass through.

[SW7750]interface Ethernet 1/0/1 [SW7750-Ethernet1/0/1]portlink-type trunk

[SW7750-Ethernet1/0/1]port trunk permit vlan all

2Create VLANs.

[SW7750-Ethernet1/0/1]vlan 3

[SW7750-vlan3]vlan 4

3Enable GVRP globally.

[SW7750-vlan4]quit

[SW7750]gvrp

4Enable GVRP on the trunk port.

[SW7750]interface Ethernet 1/0/1

[SW7750-Ethernet1/0/1]gvrp

Configure Switch B:

1 Set Gigabit Ethernet2/1 as a trunk port and allow all the VLANs to pass through.

[SW7750]interface Ethernet 2/0/1 [SW7750-Ethernet2/0/1]portlink-type trunk

[SW7750-Ethernet2/0/1]port trunk permit vlan all

2Enable GVRP globally.

[SW7750-Ethernet2/0/1]quit

[SW7750]gvrp

3Enable GVRP on the trunk port.

[SW7750]interface ethernet 2/0/1

[SW7750-Ethernet2/0/1]gvrp