3Com 10014298 Enabling and Disabling Transmission of Trap Information, Disabling the Snmp Agent

272CHAPTER 11: SYSTEM MANAGEMENT

Enabling and Disabling Transmission of Trap Information

To enable or disable transmission of trap information, perform the following configuration in Ethernet port view.

Table 310 Enable/Disable Transmission of Trap Information

Operation	Command
Enable the current port to transmit the trap	enable snmp trap updown
information
Disable the current port from transmitting trap	undo enable snmp trap updown
information

Disabling the SNMP Agent

To disable the SNMP Agent, perform the following configuration in system view.

Table 311 Disabling SNMP Agent

Operation	Command
Disable snmp agent	undo snmp-agent

If a user disables an NMP Agent, it is enabled whatever the snmp-agentcommand is configured.

Displaying and Debugging SNMP

Execute the display command to view the SNMP configuration and to verify the effect of the configuration. Execute the debugging command in user view to debug the SNMP configuration.

Table 312 Displaying and Debugging SNMP

Operation	Command
Display the statistics information about SNMP	display snmp-agent statisitcs
packets

Display the engine ID of the active device

Display the group name, the security mode, the states for all types of views, and the storage mode of each group of the switch.

Display the names of all users in the group user table

display snmp-agent { local-engineid remote-engineid

}

display snmp-agent group

display snmp-agent usm-user [ { local { engineid engineid } } username groupname ]

Display the current community name	display snmp-agent community [
	read write ]
Display the current MIB view	display snmp-agent mib-view [
	exclude include viewname
	mib-view ]
Display the contact character string of the	display snmp-agent sys-info
system	contact
Display the location character string of the	display snmp-agent sys-info
system	location
Display the version character string of the	display snmp-agent sys-info
system	version