3Com 10014298 manual Is booted Perform the following configuration in user view, Upgrading BootROM

254CHAPTER 11: SYSTEM MANAGEMENT

Configuring the Managing Devices is described in the following sections:

■Designating the APP for the Next Boot

■Displaying Devices

Designating the APP for In the case that there are several operational images in the flash memory, you can the Next Boot use this command to designate the operational file (*.app) to use when the Switch

7750 is booted.

Perform the following configuration in user view.

Table 276 Designating the APP for the next boot

Operation	Command
Designate the APP for the next boot	boot bootloader file-url

Tasks for designating the APP for the next boot are described in the following sections:

■Upgrading BootROM

■Resetting a Slot

■Setting the Slot Temperature Limit

■Setting the Backboard View

Upgrading BootROM

You can use this command to upgrade the BootROM with the BootROM program in the flash memory. This configuration task facilitates the remote upgrade. You can upload the BootROM program file, from a remote end to the switch, by FTP and then use this command to upgrade the BootROM on the modules.

Perform the following configuration in user view.

Table 277 Upgrading BootROM

Operation	Command
Upgrade BootROM	boot BootROM file-url

Resetting a Slot

The Switch 7750 allows the administrator to reset a slot in the system.

Perform the following configuration in user view.

Table 278 Resetting a Slot

Operation	Command
Reset a slot	reboot [ slot slot-num ]

The parameter slot-numranges from 0 to 6. Setting the parameter to 0 resets the fabric module, taking the same effect as resetting the entire system. Setting the parameter from 1 through 6 resets the I/O modules in the corresponding slots.

If you input reboot only, the whole system will be reset.