Displaying and Debugging the AAA, RADIUS, and HWTACACS Protocols 237

The real-time accounting interval defaults to 12 minutes.

Displaying and Debugging the AAA, RADIUS, and HWTACACS Protocols

After you configure RADIUS, execute the display command in all views to display

the running of the AAA, RADIUS, and HWTACACS configuration, and to verify the

effect of the configuration. Execute the reset command in user view to reset the

configuration. Execute the debugging command in user view to debug the

configuration.

500 - 999 12
¦1000 ¦15

Table 255 Numbers of users and the recommended intervals

Number of users Real-time accounting interval (minutes)

Tabl e 256 Displaying and Debugging AAA and RADIUS/HWTACACS Protocol

Operation Command
Display the configuration information of the
specified or all the ISP domains.
display domain [ isp-name ]
Display related information of user's
connection
display connection [ access-type
dot1x | domain domain-name |
interface interface-type
interface-number | ip ip-address
| mac mac-address | radius-scheme
radius-scheme-name | vlan vlanid
| ucibindex ucib-index |
user-name user-name ]
Display related information of the local user display local-user [ domain
isp-name | idle-cut { disable |
enable } | service-type { telnet
| ftp | lan-access | terminal } |
state { active | block } |
user-name user-name | vlan
vlan-id ]
Display the statistics of local RADIUS
authentication server
display local-server statistics
Display the configuration information of
RADIUS schemes
display radius [
radius-scheme-name ]
Display the statistics of RADIUS packets display radius statistics
Display the stopping accounting requests
saved in buffer without response
display stop-accounting-buffer {
radius-scheme radius-scheme-name
| session-id session-id |
time-range start-time stop-time |
user-name user-name }
Display the specified or all the HWTACACS
schemes
display hwtacacs [
hwtacacs-scheme-name]
Display information on the stop-accounting
packets in the buffer
display stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
Delete the stopping accounting requests
saved in buffer without response
reset stop-accounting-buffer {
radius-scheme radius-scheme-name
| session-id session-id |
time-range start-time stop-time |
user-name user-name }