3Com 10014298 manual By default, the terminal screen length is 24 lines, Managing Users

Setting Terminal Parameters 23

Configuring idle-timeoutBy default, idle-timeout is enabled and set to 10 minutes on all the user interfaces. The idle-timeoutcommand is described in Table 7.

Table 7 Idle Timeout

Operation	Command
Configure idle-timeout	idle-timeoutminutes [ seconds ]
	(idle-timeout0 means disabling
	idle-timeout.)
Restore the default idle-timeout	undo idle-timeout

Locking the User Interface The lock command locks the current user interface and prompts the user to enter a password. This makes it impossible for others to operate in the interface after the user leaves. The lock command is described in Table 8.

Table 8 Lock User Interface

Operation	Command
Lock user interface	lock

Setting the Screen Length If a command displays more than one screen of information, you can use the screen length command to determine how many lines are displayed on a screen so that information can be separated in different screens and you can view it more conveniently. The screen-lengthcommand is described in Table 9.

Table 9 Setting Screen Length

Operation	Command
Set the screen length	screen-length screen-length
	(screen-length0 indicates to disable
	screen display separation function.)
Restore the default screen length	undo screen-length

By default, the terminal screen length is 24 lines.

Setting the History Command Buffer Size

Table 10 describes the history-commandmax-sizecommand. By default, the size of the history command buffer is 10.

Table 10 Set the History Command Buffer Size

Operation	Command
Set the history command buffer size	history-command max-size value
Restore the default history command buffer	undo history-command max-size
size

Managing Users

The management of users includes: the setting of the user logon authentication method, the level of command a user can use after logging on, the level of command a user can use after logging on from the specific user interface, and the command level.