Configuring HWTACACS 233

2.4.4Configuring HWTACACS Authorization Servers Perform the following configuration in HWTACACS view. Table 2-39 Configuring HWTACACS authorization servers OperationCommand

Configure the primary HWTACACS authorization server.primary authorization ip-address [ port ]

Delete the primary HWTACACS authorization server.undo primary authorization

Configure the secondary HWTACACS authorization server.secondary authorization ip-address [ port ]

Delete the secondary HWTACACS authorization server.undo secondary authorization

The primary and secondary authorization servers cannot use the same IP address. The default port number is 49.

If you execute this command repeatedly, the new settings will replace the old settings.

2.4.5Configuring HWTACACS Accounting Servers and the Related Attributes I. Configuring HWTACACS accounting servers

Perform the following configuration in HWTACACS view. Table 2-40 Configuring HWTACACS accounting servers OperationCommand

Configure the primary TACACS accounting server.primary accounting ip-address [ port ]

Delete the primary TACACS accounting server.undo primary accounting

Configure the secondary TACACS accounting server.secondary accounting ip-address [ port ]

Delete the secondary TACACS accounting server.undo secondary accounting

The primary and secondary accounting servers cannot use the same IP address. The default port number is 49.

If you execute this command repeatedly, the new settings will replace the old settings.

II. Enabling stop-accounting packet retransmission

Page 233
Image 233
3Com 10014298 manual Configuring Hwtacacs