Configuring the Snmp Timestamp Output Format

		Maintaining and Debugging the System 263
Table 294 Syslog-Defined Severity

Severity		Description

5	Warnings	Warning, there might be an error
6	Notifications	The information should be read
7	Informational	Common prompting information
8	Debugging	Helpful information for debugging

Use the following commands to define the filtering rules of the channels.

Perform the following operation in system view.

Table 295 Define the Filtering Rules of the Channels

Operation	Command

Add the filtering record about a certain type	info-center source { modu-name
of information in a module to the information	default } channel { channel-number
channel	channel-name } [ { log trap
	debug } * { level severity state
	state ] } *

Delete the filtering record about a certain type of information in a module or all the modules from the channel

undo info-center source {

modu-name default } channel { channel-number channel-name }

■modu-name: specifies the module name.

■level : refers to the severity levels.

■severity: specifies the severity level of information. The information with the level below it will not be output.

■channel-number: specifies the channel number.

■channel-name: specifies the channel name.

Every channel has been set with a default record, whose module name is default and the module number is 0xffff0000. However, for different channels, the default record may have different default settings of log, trap and debugging. When there is no specific configuration record for a module in the channel, use the default one.

When there is more than one Telnet user or monitor user at the same time, some configuration parameters are shared among the users, such as module-based filtering settings and the severity threshold. When you modify these settings, the changes affect all users.