3Com 10014298 Perform the following configuration in all views, Saving the Current Configuration

246CHAPTER 11: SYSTEM MANAGEMENT

Perform the following configuration in all views.

Table 261 Display the Configurations of the Ethernet Switch

Operation	Command
Display the saved configuration of the	display saved-configuration
Ethernet switch

Display the current configuration of the Ethernet switch

display current-configuration [ controller interface interface-type [ interface-number ] configuration [ configuration ] [ { begin exclude include } regular-expression ]

The configuration files are displayed in their corresponding saving formats.

Saving the Current Configuration

Use the save command to retain the current-configuration in the flash memory. The configurations are saved and used when the system is next powered on.

Perform the following configuration in user view.

Table 262 Save the Current-Configuration

Operation	Command
Save the current-configuration	save

Erasing the Configuration Files from Flash Memory

The reset saved-configurationcommand can be used to erase the configuration files from flash memory. The system will use the default configuration parameters for initialization when the switch is powered on the next time.

Perform the following configuration in user view.

Table 263 Erase the Configuration Files from Flash Memory

Operation	Command
Erase the configuration files from the Flash	reset saved-configuration
Memory

You can erase the configuration files from flash memory in the following cases:

■If the software does not match the configuration files after the software is upgraded.

■If the configuration files in flash are damaged, for example, if the wrong configuration file has been downloaded.)

FTP FTP is a common way to transmit files on the Internet and IP network. FTP is a TCP/IP protocol on the application layer and is used for transmitting files between a remote server and a local host.

The Ethernet switch provides the following FTP services:

■FTP server — You can run the FTP client program to log in to the server and access the files on it.