Digital Video Recorder User Manual
1 | Power plug | 2 | Alarm in/alarm out |
3 | RS485 | 4 | USB interface |
5 | LAN port | 6 | Audio in |
7 | 8 | Audio output | |
9 | Video output | 10 | Video in |
| Fig2.2 Back Panel | ||
2.4Remote Controller Introduction
2.4.1Use Remote Controller
Notice: Please note that Remote Controller is not a standard part of this DVR. Your package might not include it.
Steps of using the Remote Controller are described as below:
STEP1 Put the battery into the Remote Controller.
1.Open the battery cover of the Remote Controller.
2.Put into two AAA batteries whose model is 7 and make sure that they are not inserted upside down.
3.Put back the battery cover.
STEP2 Check the followings if the Remote Controller does not work.
−Whether the battery’s anode and cathode are in the correct position or not.
−Whether the power of the battery is ran out or not.
−Whether there is barrier between the Remote Controller and DVR or not.
−Whether there are some signals which transmitted by other devices disturbing the Remote Controller or
not.
Notice: If the possibilities above are excluded, please contact with vendor to change the Remote Controller.
