Digital Video Recorder User Manual

Fig4.17 PTZ Configuration

1.Channel

When you need to set PTZ control, you should enter the PTZ configuration window and click the corresponding channel. Then users can begin to control the PTZ through enabled channel.

2.Baud Rate

It sets the Baud Rate of PTZ device. The default value is 9600.

3.Protocol

It sets the communication protocol of PTZ device.

4.Address

It sets the communication address of PTZ device.

Notice: Baudrate and protocol should be found in PTZ camera user manual.

58

Page 62
Image 62
Swann SW242-6T4, P-6T4 manual Fig4.17 PTZ Configuration