10
BASIC OPERATIONS

SWITCHING POWER ON/ OFF

Press the switch to switch the transceiver ON.
•A beep sounds. If programmed, an 8-character power-on message is also
momentarily displayed.
•If the Transceiver Password function is programmed, “ ” will appear on the
display when the power is turned ON. Refer to “Transceiver Password”, below.
Press the switch again to switch the transceiver OFF.
■Transceiver Password
To enter the password:
1Press the and keys to select a digit.
2Press the C> key to accept the entered digit and move to the next digit.
•Press the A key to delete an incorrect character. Press and hold the A key to
delete all entered characters.
•Repeat steps 1 and 2 to enter the entire password.
3Press the S key to confirm the password.
•If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
To enter the password using an optional DTMF keypad:
1Press the DTMF keys corresponding to the password digits.
•Press the A or DTMF # key to delete an incorrect character. Press and hold the
A or DTMF # key to delete all entered characters.
2Press the S or DTMF key to confirm the password.
•If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.

ADJUSTING THE VOLUME

Press the Volume Up () key to increase the volume. Press the Volume Down
( ) key to decrease the volume.
If Squelch Off has been programmed onto a key, you can press and hold the
Squelch Off key to listen to background noise while adjusting the volume level.